HomeHome SupportSupport ReportsReports ContactContact TestimonialsTestimonials
Pro-Tech Environmental Products


SuperFunnel With Cover
Part# 3000

DRAINMATE II Drum Funnel #3000

Drainmate  II  Superfunnel is a unique multipurpose drain sink/funnel that mounts to a closed-head 55 gallon drum (can also be mounted to a tank, see picture). The drain tube contains an anti-spill valve which will minimize the chance of overfilling the drum (see picture). Its large 24” x 24” x 8” deep size fits on top of any 55 gal drum and is made from super heavy duty 16-gauge steel. Supplied steel drainage grid suspends parts off bottom to allow for efficient draining here. Holds up to 30 used oil filters for hot draining which is currently mandated by the US EPA prior to disposal.  It can also be used to drain empty plastic oil containers as shown in picture number one. When used in conjunction with a parts washer, it extends the life of the solvent and pays for itself in just a few months by reducing the speed in which parts washing solvent get contaminated by service technicians who use the parts washing sink as a catch all for liquid wastes. Draining parts prior to rinsing them in the PWS will greatly extend the life of the parts washing solvent.  It can be loaded with many different parts for pre draining and will support up to 300 lbs of parts. Drainmate II Superfunnel has many other uses, it can be lined with a large piece of absorbent and oily sludge or any type of liquid contaminated waste could be put into it so that the liquids can drain into the drum allowing the dry solids to be disposed of easily and inexpensively.

Includes closure cover to snuff flames. Helps comply with 40 CFR 264.173 (1995) for closed containers.

  • Supports up to 300 lbs. of parts.
  • Superfunnel with many applications.
  • Unique multipurpose, drum mounted drain sink. Saves clean-up time and labor.
  • Anti-spill valve helps eliminate over-filling.
  • Comes with steel drainage grid.
  • Holds up to 30 used oil filters.
  • Pays for itself when used with parts washer. Parts do not contaminate cleaning solvent when draining.
  • Mounts on any closed-head 55 gal drum for easy fill and disposal.
  • Closure cover.

Description: Reinforced hinged arm for manually collapsible cover. 

Dimensions Unit: 24”W x 24”L x 8 ½” High

Weight: 36 lbs

Shipping: UPS or Truck

Intended Use: The Drainmate II  Superfunnel will do everything the Drainmate I Superfunnel will do plus it has a closeable and lockable lid.

It was initially developed for use where there are requirements for a closed lid on any unattended drum with hazardous waste in it (such as used oil). It has been deployed as a focal point in DIY (do-it-yourself) recycling programs.  See picture.

The Drainmate II  by virtue of its highly functional design is the strongest and largest drain sink and funnel available in the market. It can be used for any kind of petrochemical or solvent collection and can sustain up to 300 lbs of parts for draining.

Advantages & Benefits: The Drainmate II will pay for itself over and over again when placed next to any parts washer sink because it prevents contamination of the washer solvent which is both an environmental and cost problem. Large size makes it the most versatile drain/funnel available. When 5 gal capacity remains drain tube will shut off flow and liquid will start to accumulate in the sink. Just lift slowly and float ball will drop allowing all remaining liquid to drain into the 55 gallon drum.. It is then time to move to a new drum.

The manually collapsible cover has a reinforced hinged.

Click the images to enlarge.


DRAINMATE II on 55-Gallon Drum

DRAINMATE II with closed cover

DRAINMATE II side view

DRAINMATE II draining used oil filters
© 2008 - 2018 Pro-Tech Environmental Products
8019 Old National Pike | Boonsboro, MD 21713
717-261-7558 | FAX 717-352-3636

Web Site Layout & Maintenance by Nolee-O Web Design