HomeHome SupportSupport ReportsReports ContactContact TestimonialsTestimonials SiteMapSiteMap PrintPrint
Pro-Tech Environmental Products
 HOME / ACCESSORIES / PUNCH-N-DRAIN SAFETY HAMMER

PUNCH-N-DRAIN SAFETY HAMMER

 
Part#  1700

Q: How do we comply with the Federal and State Used Oil Filter Disposal Exemptions*?

A: PUNCH-N-DRAIN SAFETY HAMMER

Punch-N-Drain Safety Hammer

The PUNCH-N-DRAIN SAFETY HAMMER filter punch brings the right solution to a simple problem. PUNCH-N-DRAIN SAFETY HAMMER is constructed of a uniquely designed  weighted steel head, steel handle with a rubber coated end that provides for a secure grip and balanced action and has a replaceable, hardened steel puncture tip.
  • Meet Federal* and State Regulations for lube oil filter puncture and drain
  • Simple and effective – effortless, fun to use
  • Inexpensive
  • Safe one-hand operation eliminates screwdriver / hammer accidents
  • Makes oil and filter recycling easy
  • No filter crusher needed
    • 40CFR Part 261, Fed. Register Vol. 57, No98, 5/20/92  “EPA is therefore requiring that filters qualifying for the exemption first have the used oil removed using one of the following gravity hot-draining methods: (1) Puncturing the filter anti-drain back valve or the filter dome end and hot draining….”

Q: We do a lot of oil changes, where do we drain all the filters we have punctured?

A: PUNCH-N-DRAIN Recovery Station

PUNCH-N-DRAIN Recovery Station

The PUNCH-N-DRAIN FILTER RECOVERY STATION is when you combine the use of the unique PUNCH-N-DRAIN SAFETY HAMMER and the DRAINMATE I SuperFunnel. Drainmates drain fluids into closed-head 55 gallon drums, bulk tanks, a wall-mounted system or serve as the collection head for piped systems for easy collection and storage.

  • The complete solution for
  • Filter Draining
    • Oil Recycling
    • Filter Recycling
    • Preventing ground pollution
  • 24” x 24” x 8” – holds up to 36 filters
  • Also use for parts draining – holds up to 300 pounds
  • Anti-spill valve eliminates overfilling
  • Drains into 55 Gal. Drum or bulk tank

PUNCH-N-DRAIN SAFETY HAMMER in use

Click the images to enlarge.
| HOME || SUPER FUNNELS || ROLLER EXTRACTION SYSTEMS || ACCESSORIES || DISTRIBUTORS || REPORTS || SUPPORT || TESTIMONIALS || STORE || CONTACT |
© 2008 - 2017 Pro-Tech Environmental Products
8019 Old National Pike | Boonsboro, MD 21713
717-261-7558 | FAX 717-352-3636
info@proeprod.com

Web Site Layout & Maintenance by Nolee-O Web Design